Meerkat Supercapacitor Charger


  • Adjustable charging current

    The charging current can be selected in the range from 0.5A to 2.5A with 0.5A steps with a jumper.

  • Adjustable End-of-Charge voltage

    The 2.65V or 2.45V End-of-Charge voltage can be selected with a jumper.

  • Adjustable Maximum Power Point

    The charger will reduce a charging current to keep input power supply above a selected voltage.

  • CC/CV charging profile

    Supercapactior is charged with constant current followed by constant voltage profile.

  • LED indication

    Three LEDs indicate the power supply availability and charging status.

Meerkat Supercapacitor Charger is compact and versatile, designed to support common 2.5V and 2.7V EDLC supercapacitors. Wide input voltage ranges from 4.5 V to 16 V and adjustable Maximum Power Point provides the capability to use various power supplies, including solar panels. The charging current and end-of-charge voltage can be easily adjusted with a jumper.

The charger is designed to charge supercapacitors with a capacitance of more than 10F, with no limit on the maximum capacitance. The end-of-charge voltage can be selected to be 2.45V or 2.65V. It uses Constant-Current/Constant-Voltage (CC/CV) charging profile, which allows to fully charge the supercapacitor despite the added resistance of the wiring. When the load connected to the supercapacitor is consuming less power than it is provided by the charger, the CC/CV charging profile will keep the supercapacitor voltage constant.

The charger will reduce the charging current if the input voltage reaches the Maximum Power Point (MPP) voltage, which is adjustable with a potentiometer or fixed resistors. It allows to use power supplies with variable or limited power output, for example, solar panels.

Three LEDs are featured. The first one indicates that the charger is connected to the power supply. The other two indicate the status of the charger, either charging or charged. The status changes to charged as soon as the supercapacitor reaches the end-of-charge voltage and the charger enters the Constant Voltage (CV) mode.

Tech Specs


Input voltage: 4.5V to 16V

End-of-charge voltage: 2.45V / 2.65V

MPP voltage range: 4.5V to 16V

Charging current 0.5A / 1.0A / 1.5A / 2.0A / 2.5A

Typical efficiency: 75%

State indication: Power, Charging, Charged

Dimensions: 50mm x 40mm x 14.9mm (1.97'' x 1.57'' x 0.57'')

Downloads